Home » Support»Find Products For Your System»Location B

Location B

LOCATION B – FIND PRODUCTS FOR YOUR SYSTEM

See the info below to find out which product is suitable for your application.

Product Finder

LOCATIONS

Choose one of the locations that you would like to find out more about.

  1. For T1, DSL, ISDN lines entering building – (LOCATION B)


    -SUGGESTED PRODUCTS-
    • MLLT1-Click here for specification-

      (For T1/ISDN) – MLLT1: This Modular Protector Protects Up One T1 or ISDN Line per Port Using RJ-48C/48S Connectors. T1/LL: 2-Pairs (Pins 1, 2 & 4, 5); ISDN: BRI/PRI Compatible. UL 497A Secondary Protector Approval.

  2. For CO lines entering building – (LOCATION B)


    -SUGGESTED PRODUCTS-
    • MCO4110-Click here for specification-

      MCO4110: This Modular Protector Protects Up to 8- Wires (4-pairs) Using 110 Punchdown Block on the Input and 110 Punchdown Block or Four RJ-11 or Two RJ-45 on the Output. UL 497A Secondary Protector Approval.

    • MCO8110-Click here for specification-

      MCO8110: This Modular Protector Protects Up to 16-Wires (8-pairs) Using 110 Punchdown Block on the Input and 110 Punchdown Block on the Output. UL 497A Secondary Protector Approval.

    • MCO25-Click here for specification-

      MCO25: This Modular Protector Protects 25-Pairs Using RJ-21X (Amphenol) Connectors (Pins 1-50, Male In / Female Out). UL 497A Secondary Protector Approval.

    • MCO25-Click here for specification-

      MCO4: This Modular Protector Protects up to 4-Wire (2-Pairs) per Jack. Using RJ-11/45 Connectors (2 In or 2 Out, Pins 3 & 6 and 4 & 5 Protected). UL 497A Secondary Protector Approval.

    • MCO25-Click here for specification-

      MCO4X4: This Modular Protector Protects up to 2-Wire (1-Pair) per Jack. Using RJ-11/45 Connectors (Pins 4, 5). UL 497A Secondary Protector Approval.